Why use 3M VentureShield Paint Protection Film on my vehicle.

1. Why do I need VentureShield?

VentureShield paint protection film is the most effective way to protect your car or motorcycle paintwork from the damage that can be caused by everyday motoring.  VentureShield will protect your vehicle's paintwork from stone damage, minor scuffs and abrasions as well as environmental damage.  VentureShield is a tough, clear urethane film with excellent elastic properties and optical clarity.  It provides a durable protective barrier that doesn't alter the vehicle's appearance and it keeps it looking as good as new.  VentureShield is OEM tested and motorsport approved in the harshest environments on 2 and 4 wheels.  It is widely used by teams at the very highest levels of both motorbike and car motorsports.

2. Does it just protect from stone chips?

No, because it is a durable, strong urethane film it will also protect paintwork against minor scratches and scuffs. Take a look at the BMW that hit the garage wall at 8mph, on the gallery page to see how effective the film is!

3. Why is VentureShield an investment?

When you come to resell your vehicle the paintwork underneath the film will be as good as the day it was installed so it should command a higher resale price than a damaged car.

When to use 3M VentureShield Paint Protection Film.

1. When is the best time to install VentureShield?

The best time to install VentureShield is within 6 months of buying a new vehicle, before it has picked up much damage. The sooner the better as prevention is definitely better than cure!

2. Is it better to fit VentureShield in the summer or winter?

It makes no difference at all what time of year the film is better as it will be fitted in Chipguard UK's clean& tidy workshop. 

Installation

1. Do I need to do anything prior to installation?

There is nothing that you need to do providing that the car or bike is relatively clean.  Chipguard UK will clean and prep the surfaces ready for installation.

2. Is the film cut to shape on the vehicle?

No, definitely not.  3M's dedicated templater has made pre-cut pattern designs for most makes and models of cars and motorbikes since 2000.  The template is cut by plotter at Chipguard UK's Telford premises and it is then ready to be shipped for motorbike easy DIY fit installation or to be fitted by Chipguard UK's 3M trained installers at our custom built workshop.

3. How long does installation take?

Chipguard generally allow a day to fit cars, if you drop your car off at our Telford workshop in the morning it should be good to go and ready for collection in the afternoon.  If you are fitting a DIY easy fit motorbike kit you should allow at least a couple of hours, depending on the size of the kit. 

4. How is the 3M VentureShield film fitted?

 All car kits have to be fitted by our 3m trained and approved installers, on site at our designated workshop in Telford.  The motorbike kits are designed as DIY easy to fit kits.  Chipguard UK post the kits, free of charge and are supplied as pre-cut patterns together with full fitting instructions, a diagram of the components, a spray bottle and a squeegee.

Care and Maintenance

1. How do I take care of the film and is there any special needed?

Essentially you treat as you would your normal paintwork, by regular washing and the occasional polish.  We recommend that you use 3M Performance Finish wax (this is available from Chipguard UK's on-line store) on both the film and paintwork.  3M performance Finish makes subsequent cleaning and removal of stains and insects from the film and paintwork much easier.

2. How long does the film last?

Provided that you take care of the film and that you don’t damage it the VentureShield film should last for years.  If you are unfortunate enough to scrape a wall or scuff your vehicle, the VentureShield may get damaged but the paintwork underneath should be fine.  It is possible to remove and replace the damaged piece without having to buy a complete new kit.

3. Can I remove the 3M VentureShield film and if so does it leave a residue or remove the paint?

Yes you can remove the VentureShield film.  If you warm the panel first it helps the film to peel off.  Once removed it won't leave a residue on the surface.  If the paintwork was original when the VentureShield was fitted, it won’t be removed by taking off the film.  However, if the vehicle has been resprayed you should consult Chipguard UK before buying a VentureShield kit.